IGAP-6620+

Industrial Dual RF in IEEE 802.11 a/b/g/n Wireless Access Point with 2x10/100/1000Base-T(X)

 

IGAP-6620+ is a reliable WLAN Access Point with 2 Ethernet Gigabit ports and dual RF in IEEE 802.11 a/b/g/n wireless modules. It can be configured to operate in AP/Bridge/Repeater/AP-Client mode. You are able to configure IGAP-6620+ by WEB interface via LAN port or WLAN interface. IGAP-6620+ provides dual Ethernet ports in switch mode, so that you can use Daisy Chain to reduce the usage of Ethernet switch ports. In addition, IGAP-6620+ also provides P.D. feature on ETH2 which is fully compliant with IEEE802.3af PoE P.D. specification. Therefore, IGAP-6620 is one of the best communication solutions for wireless applications on the industrial network..

Features

High Speed Air Connectivity: WLAN interface support up to 300Mbps link speed

Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported

Support X-Roaming < 60 ms

Dual RF for redundant wireless communication

Support wireless load balance

Support MAC Filter

Support Long Distance Air Connectivity

Provide Digital Input and Digital Output

Support AP/Bridge/Repeater/AP-Client Mode

Switch Mode Supported: Daisy Chain support to reduce usage of switch ports

Wireless connecting status monitoring

Secured Management by HTTPS

Event Warning by Syslog, Email, SNMP Trap, Relay and Beeper

Rigid IP-30 housing design

DIN-Rail and Wall-mount enabled

Specifications

  IGAP-6620+
Physical Ports  
100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX                                                                                     2
5-Pin Terminal Block 4(DI and DO)
Antenna Connector 4
P.O.E. PD port Present at ETH2
Fully compliant with IEEE 802.3af  Power Device specifi cation
Over load & short circuit protection
Isolation Voltage : 1000 VDC min.
Isolation Resistance : 108 ohms min
WLAN interface  
Operating Mode AP/Bridge/Repeater/AP-Client
Antenna and connector Reverse SMA Female
Radio Frequency Type DSSS
Modulation IEEE802.11b: CCK, DQPSK, DBPSK
IEEE802.11a/g: OFDM with BPSK, QPSK, 16-QAM, 64-QAM
IEEE802.11n: OFDM with BPSK, QPSK, 16-QAM, 64-QAM
Frequency Band

America/FCC: 2.412~2.462 GHz (11 channels)
                     5.180~5.240 GHz & 5.745~5.825 GHz (9 channels)
Europe CE/ETSI: 2.412~2.472 Ghz (13 channels)
                       5.180~5.240 GHz  (4 channels)
 

Transmission Rate IEEE802.11b: 1/ 2/ 5.5/ 11 Mbps
IEEE802.11a/g: 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54 Mbps
IEEE802.11n:up to 300Mbps
Transmit Power 802.11a: 12dBm ± 1.5dBm@54Mbps<br< a="">>802.11b: 17dBm ± 1.5dBm@11Mbps<br< a="">>802.11g: 16dBm ± 1.5dBm@54Mbps<br< a="">>802.11gn HT20: 15dBm ± 1.5dBm @MCS7
802.11gn HT40: 14dBm ± 1.5dBm @MCS7
802.11an HT20: 12dBm ± 1.5dBm @MCS7
802.11an HT40: 11dBm ± 1.5dBm @MCS7
Receiver Sensitivity 802.11a : -76dBm ± 2dBm@54Mbps<br< a="">>802.11b : -85dBm ± 2dBm@11Mbps<br< a="">>802.11g : -76dBm ± 2dBm@54Mbps<br< a="">>802.11gn HT20:-75dBm ± 2dBm@MCS7<br< a="">>802.11gn HT40:-72dBm ± 2dBm@MCS7<br< a="">>802.11an HT20:-74dBm ± 2dBm@MCS7<br< a="">>802.11an HT40:-71dBm ± 2dBm@MCS7>
Encryption Security WEP: (64-bit ,128-bit key)
WPA/WPA2 PSK :TKIP and AES encryption (802.11i)
802.1X/RADIUS Authentication supported
Wireless Security SSID broadcast disable
Protocol Support  
Protocol ARP, BOOTP, DHCP, DNS, HTTPs, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, STP, RSTP
LED Indicators  
Power Indicator 3 x LEDs, PWR1(2)(PoE) / Ready:
   Red On : Power is on and booting up
   Green On : Power is on and functioning Normal
100/1000TX RJ45 Port Indicator 2 x LEDs,
LNK/ACT:Green for port Act.
Speed: Green for port Link at 1000Mbps
            Amber for port Link at 100Mbps.
            Off for port Link at 10Mbps
WLAN LEDs 2 x Green Solid On: RF on, Blink: data transmitting
2 x Green for WLAN work on 2.4GHz
2 x Green for WLAN work on 5GHz
Fault 1 x LED, Red for Ethernet link down or power down indicator
Fault contact  
Relay Relay output to carry capacity of 1A at 24VDC
Power  
Redundant Input Power Dual DC inputs. 12-48VDC on 6-pin terminal block
Power Consumption (Typ.) 11
Overload Current Protection Present
Reverse Polarity Protection Present
Physical Characteristic  
Enclosure IP-30
Dimension (W x D x H) 74.3(W) x 109.2(D) x 153.6(H) mm (2.93 x 4.3 x 6.05 inch.)
Weight (g) 1250
Environmental 
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -25 to 70°C (-13 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory approvals  
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS),EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 5 years

Available Model

Model No.Description
IGAP-6620+_EU Industrial Outdoor Dual RF in IEEE 802.11 a/b/g/n wireless access point with 2x10/100/1000Base-T(X) PoE P.D., EU band
IGAP-6620+_US Industrial Outdoor Dual RF in IEEE 802.11 a/b/g/n wireless access point with 2x10/100/1000Base-T(X) PoE P.D., US band

Accessories

Model No.Description
DR-120 series 120W DIN-Rail power supply series
DR-45 series 45W DIN-Rail power supply series
DR-75 series 75W DIN-Rail power supply series
WLAN RF Antenna Series WLAN RF Antenna Series