IGAP-420 is a reliable WLAN Access Point with 2 Ethernet Gigabit ports and IEEE 802.11 b/g/n wireless modules. It can be configured to operate in AP/Bridge/Repeater/AP-Client mode. You are able to configure IGAP-420 by WEB interface via LAN port or WLAN interface. IGAP-420 provides dual Ethernet ports in switch mode, so that you can use Daisy Chain to reduce the usage of Ethernet switch ports. In addition, IGAP-420 series also provides P.D. feature on ETH2 which is fully compliant with IEEE802.3af PoE P.D. specification. Therefore, IGAP-420 is one of the best communication solutions for wireless applications on the industrial network..
Features
High Speed Air Connectivity: WLAN interface support up to 300Mbps link speed
Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported
Support X-Roaming < 60 ms
Support wireless load balance
Support MAC Filter
Support Long Distance Air Connectivity
Provide Digital Input and Digital Output
Support AP/Bridge/Repeater/AP-Client Mode
Switch Mode Supported: Daisy Chain support to reduce usage of switch ports
Wireless connecting status monitoring
Secured Management by HTTPS
Event Warning by Syslog, Email, SNMP Trap, Relay and Beeper
Rigid IP-30 housing design
DIN-Rail and Wall-mount enabled
Specifications
| |
IGAP-420 |
IGAP-420+ |
| Physical Ports |
|---|
| 100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX |
2 |
| 5-Pin Terminal Block |
4(DI and DO) |
| Antenna Connector |
2 |
| P.O.E. PD port |
|
Present at ETH2
Fully compliant with IEEE 802.3af Power Device specifi cation
Over load & short circuit protection
Isolation Voltage : 1000 VDC min.
Isolation Resistance : 108 ohms min |
| WLAN interface |
|---|
| Operating Mode |
AP/Bridge/Repeater/AP-Client |
| Antenna and connector |
Reverse SMA Female |
| Radio Frequency Type |
DSSS |
| Modulation |
IEEE802.11b: CCK, DQPSK, DBPSK
IEEE802.11g: OFDM with BPSK, QPSK, 16-QAM, 64-QAM
IEEE802.11n: OFDM with BPSK, QPSK, 16-QAM, 64-QAM |
| Frequency Band |
America/FCC: 2.412~2.462 GHz (11 channels)
Europe CE/ETSI: 2.412~2.472 Ghz (13 channels)
|
| Transmission Rate |
IEEE802.11b: 1/ 2/ 5.5/ 11 Mbps
IEEE802.11g: 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54 Mbps
IEEE802.11n:up to 300Mbps |
| Transmit Power |
802.11b: 17dBm ± 1.5dBm@11Mbps<br< a="">>802.11g: 16dBm ± 1.5dBm@54Mbps<br< a="">>802.11gn HT20: 15dBm ± 1.5dBm @MCS7
802.11gn HT40: 14dBm ± 1.5dBm @MCS7 |
| Receiver Sensitivity |
802.11b : -85dBm ± 2dBm@11Mbps<br< a="">>802.11g : -76dBm ± 2dBm@54Mbps<br< a="">>802.11gn HT20:-75dBm ± 2dBm@MCS7<br< a="">>802.11gn HT40:-72dBm ± 2dBm@MCS7> |
| Encryption Security |
WEP: (64-bit ,128-bit key)
WPA/WPA2 PSK :TKIP and AES encryption (802.11i)
802.1X/RADIUS Authentication supported |
| Wireless Security |
SSID broadcast disable |
| Protocol Support |
|---|
| Protocol |
ARP, BOOTP, DHCP, DNS, HTTPs, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, STP (IEEE 802.1D), RSTP |
| LED Indicators |
|---|
| Power Indicator |
3 x LEDs, PWR1(2)(PoE) / Ready:
Red On : Power is on and booting up
Green On : Power is on and functioning Normal |
| 100/1000TX RJ45 Port Indicator |
2 x LEDs,
LNK/ACT:Green for port Act.
Speed: Green for port Link at 1000Mbps
Amber for port Link at 100Mbps.
Off for port Link at 10Mbps |
| WLAN LEDs |
1 x LED, Green for WLAN Link/ Act |
| Fault |
1 x LED, Red for Ethernet link down or power down indicator |
| Fault contact |
|---|
| Relay |
Relay output to carry capacity of 1A at 24VDC |
| Power |
|---|
| Redundant Input Power |
Dual DC inputs. 12-48VDC on 6-pin terminal block |
Dual DC inputs. 12-48VDC on 6-pin terminal block |
| Power Consumption (Typ.) |
7.5W |
8.5W |
| Overload Current Protection |
Present |
| Reverse Polarity Protection |
Present |
| Physical Characteristic |
|---|
| Enclosure |
IP-30 |
| Dimension (W x D x H) |
74.3(W) x 109.2(D) x 153.6(H) mm (2.93 x 4.3 x 6.05 inch.) |
| Weight (g) |
1150 |
1155 |
| Environmental |
|---|
| Storage Temperature |
-40 to 85°C (-40 to 185°F) |
| Operating Temperature |
-25 to 70°C (-13 to 158°F) |
| Operating Humidity |
5% to 95% Non-condensing |
| Regulatory approvals |
|---|
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS),EN61000-4-8, EN61000-4-11 |
| Shock |
IEC60068-2-27 |
| Free Fall |
IEC60068-2-32 |
| Vibration |
IEC60068-2-6 |
| Safety |
EN60950-1 |
| Warranty |
5 years |
Accessories
| Model No. | Description |
|---|
| DR-120 series |
120W DIN-Rail power supply series |
| DR-45 series |
45W DIN-Rail power supply series |
| DR-75 series |
75W DIN-Rail power supply series |
| WLAN RF Antenna Series |
WLAN RF Antenna Series |