IAP-420 / IAP-420+ series are reliable 802.11 b/g/n WLAN Access Point with 2 ports LAN. It supports 802.1X and MAC filters for security control. It can be configured to operate in AP/Bridge/Repeater/AP-Client mode. You are able to configure IAP-420 / IAP-420+ series by WEB interface via LAN port or WLAN interface. In addition, IAP-420+ also provides P.D. feature on ETH1 which is fully compliant with IEEE802.3af PoE P.D. specification. Therefore, IAP-420 / IAP-420+ series are one of the best communication solutions for wireless applications on the industrial network.
Features
High Speed Air Connectivity: WLAN interface support up to 150 Mbps link speed
Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported
Support X-Roaming < 100 ms
Support AP/Client/Bridge/AP-Client Mode
Secured Management by HTTPs
Wireless connecting status monitoring
Event Warning by Syslog, Email, SNMP Trap
1KV isolation for PoE P.D. port of IAP-420+
Rigid IP-30 housing design
DIN-Rail and Wall-mount enabled
Specifications
| |
IAP-420 |
IAP-420+ |
| Physical Ports |
|---|
| 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX |
2 |
| P.O.E. PD port |
|
Present at ETH1
Fully compliant with IEEE 802.3af Power Device specifi cation
Over load & short circuit protection
Isolation Voltage : 1000 VDC min.
Isolation Resistance : 108 ohms min |
| WLAN interface |
|---|
| Operating Mode |
AP/Bridge/AP-Client |
| Antenna Connector |
1 x External reverse SMA-type antenna connector |
| Radio Frequency Type |
DSSS, OFDM |
| Modulation |
IEEE802.11b: CCK, DQPSK, DBPSK
IEEE802.11g/n: OFDM with BPSK, QPSK, 16QAM, 64QAM |
| Frequency Band |
America/FCC: 2.412~2.462 GHz (11 channels)
Europe CE/ETSI: 2.412~2.472 Ghz (13 channels) |
| Transmission Rate |
802.11b: 1/2/5.5/11 Mbps
802.11g: 6/9/12/18/24/36/48/54 Mbps
802.11n(40MHz): UP to 150 Mbps |
| Transmit Power |
802.11b: 13.5dBm ±1.5dBm
802.11g: 13.5dBm ±1.5dBm
802.11n(2.4G@20MHz): 13.5dBm ±1.5dBm
802.11n(2.4G@40MHz): 13.5dBm ±1.5dBm |
| Receiver Sensitivity |
802.11b: -90dBm ±2dBm@1Mbps<br< a="">>802.11g: -72dBm ±2dBm@54Mbps<br< a="">>802.11n(2.4G@40MHz,MCS7): -68dBm ±2dBm |
| Encryption Security |
WEP: (64-bit, 128-bit key supported)
WPA/WPA2:802.11i (WEP and AES encryption)
WPA-PSK (256-bit key pre-shared key supported)
802.1X Authentication supported
TKIP encryption |
| Wireless Security |
SSID broadcast disable and enable |
| Protocol Support |
|---|
| Protocol |
ARP,BOOTP, DHCP, DNS, HTTP, IP, ICMP, SNTP, TCP, UDP, 802.1X, SNMP, STP |
| LED Indicators |
|---|
| Power Indicator |
LED x 3, PWR 1, 2, (PoE):
Green On: Power is on and functioning Normally. |
| 100/1000TX RJ45 Port Indicator |
LED x 2 , Green for port Link/Act at 100Mbps. |
| WLAN LEDs |
WLAN Link /ACT: Green: Link, |
| Power |
|---|
| Redundant Input Power |
Dual DC inputs. 12~48VDC on 4-pin terminal block |
| Power Consumption (Typ.) |
4watts |
| Overload Current Protection |
Present |
| Reverse Polarity Protection |
Present |
| Physical Characteristic |
|---|
| Enclosure |
IP-30 |
| Dimension (W x D x H) |
41(W) x 81(D) x 95(H) mm (1.6 x 3.1 x 3.7 inch.) |
| Weight (g) |
292 |
297 |
| Environmental |
|---|
| Storage Temperature |
-40 to 85°C (-40 to 185°F) |
| Operating Temperature |
-10 to 60oC (14 to 140oF) |
| Operating Humidity |
5% to 95% Non-condensing |
| Regulatory approvals |
|---|
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS),EN61000-4-8, EN61000-4-11 |
| Shock |
IEC60068-2-27 |
| Free Fall |
IEC60068-2-31 |
| Vibration |
IEC60068-2-6 |
| Safety |
EN60950-1 |
| Warranty |
3 years |
Accessories
| Model No. | Description |
|---|
| DR-120 series |
120W DIN-Rail power supply series |
| DR-45 series |
45W DIN-Rail power supply series |
| DR-75 series |
75W DIN-Rail power supply series |
| WLAN RF Antenna Series |
WLAN RF Antenna Series |