IPS-2042FX

Industrial 6-port lite-managed PoE Ethernet switch with 4x10/100Base-T(X) P.S.E. and 2x100Base-FX

IPS-2042FX
zoom Zoom image
 

IPS-2042TX/2042FX series are lite-managed redundant ring Ethernet switches with 4x10/100Base-T(X) ports with PoE P.S.E. function and 2x10/100Base- T(X) or 2x100Base-FX fiber ports. IPS series support Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IPS switches has 4X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. With complete support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring, O-Chain and STP/RSTP (IEEE802.1w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IPS-2042TX / 2042FX series can be managed centralized and convenient by a powerful windows utility — Open-Vision. The wide operating temperature range from -40°C to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for easy managed and Fiber Ethernet application.

Features

IPS-2042TX provides 4x10/100Base-T(X) P.S.E. and 2x10/100Base-T(X) ports
IPS-2042FX series provide 4x10/100Base-T(X) P.S.E. and 2x100Base-FX single/multi mode fiber ports
Fastest Redundant Ethernet Ring: O-Ring (Recovery time < 10ms over 250 units of connection)
Open-Ring supports the other vendor’s ring technology in open architecture
O-Chain support the multiple redundant ring technology
Provides Fast recovery technology for Ethernet multi-redundancy
STP/RSTP supported
SNMP v1/v2c/v3 support for secured network management
Supports LLDP (Link Layer Discovery Protocol)
Configurable by Web-based and Windows utility (Open-Vision)
Event notification through Syslog, Email, and SNMP trap
Two 100Base-FX fiber port support for long distance connection
Four P.S.E. ports based on IEEE 802.3af standard – up to 25 Watts per port
Rigid IP-30 housing design
DIN-Rail and wall mounting enabled

Specifications

ORing Switch Model IPS-2042TX IPS-2042FX-MM-SC IPS-2042FX-SS-SC
Physical Ports   
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX with P.S.E. 4 4 4
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX without P.S.E. 2 - -
Fiber Ports Number - 2 2
Fiber Ports Standard - 100Base-FX 100Base-FX
Fiber Mode - Multi-mode Single-mode
Fiber Diameter (μm) - 62.5/125 μm
50/125 μm		 9/125 μm
Fiber Optical Connector - SC SC
Fiber Ports Specifications Typical Distance (km) - 2 km 30 km
Wavelength (nm) - 1310 nm 1310 nm
Max. Output Optical Power (dBm) - -14 dBm -8 dBm
Min. Output Optical Power (dBm) - -23.5 dBm -15 dBm
Max. Input Optical Power(Saturation) - 0 dBm 0 dBm
Min. Input Optical Power (Sensitivity) - -31 dBm -34 dBm
Link Budget (dB) - 7.5 dB 19 dB
Technology   
Ethernet Standards IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3x for Flow control
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
IEEE 802.3af PoE specification (up to 25 Watts per port for P.S.E.)
MAC Table 2048 MAC addresses
Processing Store-and-Forward
Switch Properties Switching bandwidth : 1.2Gbps
VLAN : Port Based
Security Features Enable/disable ports
VLAN to segregate and secure network traffic
Software Features STP/RSTP (IEEE 802.1D/w)
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units
Open-Ring support the other vendor’s ring technology in open architecture
Port configuration, status, statistics, monitoring, security
DHCP Client
Network Redundancy O-Ring
Open-Ring
O-Chain
Fast recovery
STP
RSTP
LED Indicators   
Power /PoE Indicator Green : Power LED x 3, Green : PoE LED x 4
R.M. Indicator Green : Indicates that the system is operating in O-Ring Master mode
Fault Indicator Amber : Indicates unexpected event occurred
O-Ring Indicator Green : Indicates that the system is operating in O-Ring mode
10/100Base-T(X) RJ45 Port Indicator Green for port Link/Act. Amber for Link
Fiber Port Indicator Green for port Link/Act. Amber for Link
Power   
Redundant Input Power Triple DC inputs. 2x48VDC on 7-pin terminal block , 1x48VDC on power jack
Power Consumption (Typ.) 5 Watts 7 Watts 7 Watts
Overload Current Protection Present
Reverse Polarity Protection Present on terminal block
Physical Characteristics   
Enclosure IP-30
Dimensions (W x D x H) 52(W)x106.1(D)x144.3(H) mm (2.05x4.18x5.68 inch.)
Weight (g) 696 g 709 g 709 g
Environmental   
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals   
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1,
MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ) 304,333 269,978 270,625
Warranty 5 years

 

 

Available Model

Model No.Description
IPS-2042FX-MM-SC Industrial 6-port lite-managed PoE Ethernet switch with 4x10/100Base-T(X) P.S.E. and 2x100Base-FX, multi-mode, 2Km/1310nm, SC connector
IPS-2042FX-SS-SC Industrial 6-port lite-managed PoE Ethernet switch with 4x10/100Base-T(X) P.S.E. and 2x100Base-FX, single-mode, 30Km/1310nm, SC connector

Accessories

Model No.Description
Open-Vision M500 Powerful Network Management Windows Utility Suite, 500 IP devices
SFP1G series 1Gbps SFP optical transceiver
DR-45 series 45W DIN-Rail power supply series
PAA-121000 12VDC/1000mA 12W Power Adapter with universal 100 to 240VAC input, US plug
PAE-121000 12VDC/1000mA 12W Power Adapter with universal 100 to 240VAC input, EU plug
 
 
 

Main Search Products catalog Mail Contacts