IPS-1042FA series are unmanaged PoE Ethernet switches with 4 x 10/100Base-T(X) P.S.E. and 2x100Base-FX ports. IPS-1042FA series supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-1042FA series has 4X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. IPS-1042FA series support redundant power inputs, configurable relay output alarm and rigid IP-30 housing. In addition, the wide operating temperature range from -40 to 70oC can satisfy most of operating environment.
Features
IPS-1042FA series provide 4x10/100Base-T(X) PoE(P.S.E.) and 2x100Base-FX single/multi-mode fiber ports
Supports IEEE 802.3at compliant 30Watts PoE per port
Support auto-negotiation and auto-MDI/MDI-X
Support store and forward transmission
Support flow control
Support surge protection technology
Warning system by relay output
Slim type rigid IP-30 housing design
DIN-Rail and wall mounting enabled
Specifications
| ORing Switch Model |
- |
IPS-1042FA-MM-SC |
IPS-1042FA-SS-SC |
| Physical Ports |
|---|
| 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX with P.S.E. |
- |
4 |
4 |
| 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX without P.S.E. |
- |
- |
- |
| Fiber Ports Number |
- |
2 |
2 |
| Fiber Ports Standard |
- |
100Base-FX |
100Base-FX |
| Fiber Mode |
- |
Multi-mode |
Single-mode |
| Fiber Diameter (μm) |
- |
62.5/125 μm
50/125 μm |
9/125 μm |
| Fiber Optical Connector |
- |
SC |
SC |
| Fiber Ports Specifications Typical Distance (km) |
- |
2 km |
30 km |
| Wavelength (nm) |
- |
1310 nm |
1310 nm |
| Max. Output Optical Power (dBm) |
- |
-14 dBm |
-8 dBm |
| Min. Output Optical Power (dBm) |
- |
-23.5 dBm |
-15 dBm |
| Max. Input Optical Power(Saturation) |
- |
0 dBm |
0 dBm |
| Min. Input Optical Power (Sensitivity) |
- |
-31 dBm |
-34 dBm |
| Link Budget (dB) |
- |
7.5 dB |
19 dB |
| Technology |
|---|
| Ethernet Standards |
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3x for Flow control
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.) |
| MAC Table |
2048 MAC addresses |
| Processing |
Store-and-Forward |
| LED Indicators |
|---|
| Power Indicator |
Green : Power LED x 2 |
| Fault Indicator |
Amber : Indicates unexpected event occurred |
| 10/100Base-T(X) RJ45 Port Indicator |
Green for port Link/Act. Amber for Link. Green for PoE power injected |
| 100Base-FX Fiber Port Indicator |
Green for port Link/Act. |
| Power |
|---|
| Redundant Input Power |
Dual DC power inputs. 50~57VDC on 6-pin terminal block |
| Power Consumption (Typ.) |
- |
6.78 Watts (P.S.E. not included) |
5.65 Watts (P.S.E. not included) |
| Overload Current Protection |
Present |
| Reverse Polarity Protection |
Present on terminal block |
| Physical Characteristics |
|---|
| Enclosure |
IP-30 |
| Dimensions (W x D x H) |
26.1 (W) x 94.9 (D) x 144.3 (H)mm (1.03 x 3.74 x 5.68 inch) |
| Weight (g) |
- |
395 g |
395 g |
| Environmental |
|---|
| Storage Temperature |
-40 to 85°C (-40 to 185°F) |
| Operating Temperature |
-40 to 70°C (-40 to 158°F) |
| Operating Humidity |
5% to 95% Non-condensing |
| Regulatory Approvals |
|---|
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock |
IEC60068-2-27 |
| Free Fall |
IEC60068-2-32 |
| Vibration |
IEC60068-2-6 |
| Safety |
EN60950-1, |
| Warranty |
5 years |