The INJ-102GT++ PoE Injector series is not only an IEEE802.3at compliant device but also an advanced high power PoE injector. It is intelligent detection that provided 2-ports 10/100/1000Base-T (X) PoE outputs. The device does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable. This protection against damage to non-PoE compliant equipment which may be connected to the Ethernet cable. Therefore, only an IEEE 802.3at/802.3af compliant device can be powered with the INJ-102GT++ PoE Injector. Typically in Gigabit networks the maximum allowable CAT5 cable length is about 100 meters, due to the limitation of the Ethernet standards. Because of its 24~57VDC power input with boosting circuit, the total output power can be up to 180Watts[Note2] for all ports usage. The installer doesn’t need to worry about voltage drops caused by cable length. The INJ-102GT++ PoE Injector can function with any PoE P.D. equipment which is fully compliant with the IEEE 802.3at/802.3af PoE standards.
Note1: The equipment being powered must be fully IEEE 802.3at/802.3af compliant in order for the power supply to be able to sense the PoE devices signature and apply power. Power is supplied on Ethernet pins 1/2 (V+) and 3/6 (V-).
Note 2: LTPoE++TM PSE technology is applied on this product. Only when an LTPoE++ TM Powered Device (PD) is attached can the PSE port deliver up to 180W of output power.
Features
Supports 2x10/100/1000Base-T(X) for power and data Output
Fully compliant with IEEE802.3at/802.3af standard
Auto protection for Over Voltage Power Input and over current output
Supports totallyPower Output up to 180Watts for all ports usage.
Supports Power Input range from 24VDC to 57VDC
High reliability and rigid IP-30 housing
DIN-Rail and Wall Mount Design
Specifications
| ORing Media Converter Model |
INJ-102GT++ |
INJ-102GT++-24V |
| Physical Ports |
|---|
| 10/100/1000Base-T(X) in RJ-45 Ethernet Port Input |
2 |
| 10/100/1000Base-T(X) in RJ-45 Ethernet Port with P.S.E. Output |
2 |
| Operating Voltage |
|---|
| Input Voltage |
50 ~ 57 Vdc |
24 ~ 50 Vdc |
| Output Power |
57V / 3157mA, 180 Watts max.
(Total of 2 ports) |
50V / 1800mA, 90 Watts max.
(Total of 2 ports) |
| LED Indicator |
|---|
| Power Indicator |
PWR / Ready: 1 x LED
Green On: Power is on and functioning Normally. |
| PoE Indicators |
2 x LED
Blue On: PoE Device Link
Blue Off : None PoE Device Detected |
| Protection |
|---|
| Short Circuit Protection |
Present |
| Over Load Protection |
Present |
| Physical Characteristics |
|---|
| Enclosure |
IP-30 |
| Dimensions (W x D x H) |
26.1 (W) x 70 (D) x 95 (H)mm (1.03 x 2.76 x 3.74 inch) |
41(W)x70(D)x95(H) mm (1.61 x 2.75 x 3.74 inch.) |
| Weight (g) |
300g |
369g |
| Environmental |
|---|
| Storage Temperature |
-40 to 80°C (-40 to 176°F) |
| Operating Temperature |
-20 to 70°C (-4 to 158°F) |
| Operating Humidity |
5% to 90% Non-condensing |
| Regulatory Approvals |
|---|
| EMI |
FCC Part 15, CISPR (EN55022) class A, |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock |
IEC60068-2-27 |
| Free Fall |
IEC60068-2-31 |
| Vibration |
IEC60068-2-6 |
| Safety |
EN60950-1 |
| Warranty |
5 years |
Accessories
| Model No. | Description |
|---|
| DR-75 series |
75W DIN-Rail power supply series |
| DR-120 series |
120W DIN-Rail power supply series |