INJ-102GT-24V

The INJ-102GT-24V PoE Injector is not only an IEEE802.3at compliant device with intelligent detection that provided 2-ports 10/100/1000Base-T(X) PoE outputs.  The device does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable.  This protection against damage to non-PoE compliant equipment which may be connected to the Ethernet cable.  Because of this intelligent detection, only an IEEE 802.3at/af compliant device can be powered with the INJ-102GT-24V PoE Injector.  Typically in Gigabit networks the maximum allowable CAT5 cable length is about 100 meters, due to the limitation of the Ethernet standards.  Because of its 24~50V insertion, the installer doesn't need to worry about voltage drops caused by cable length.  The INJ-102GT-24V PoE Injector can function with any PoE P.D. equipment which is fully compliant with the IEEE 802.3at/af PoE standards.

Note: P.D. side must be fully compliant IEEE 802.3at/af standard in order for the power supply to be able to sense the PoE devices signature and apply power.  Power is supplied on Ethernet pins 1/2 (V+) and 3/6 (V-).

Features

 Supports 2x10/100/1000Base-T(X) for power and data Output

 Fully compliant with IEEE802.3at/802.3af

 Auto protection for Over Voltage Power Input and over current output

 Supports totally Power Output up to 30Watts at 50VDC for all ports usage.

 Supports Power Input range from 24Vdc to 50Vdc

 IP-30 Rugged Case Design

 DIN-Rail and Wall Mount Design