RMC-111 series is industrial rack mount card type Ethernet to fiber media converter for rack-mounted chassis box of RMC-1000, that supports hot-swappable and easy installation to RMC-1000. RMC-111 series is a cost-effective solution for the conversion between 10/100Base-T(X) and 100Base-FX interface, it allows you to extend communication distance by optical fiber. RMC-111 series supports MDI/MDIX auto detection, so you don’t need to use crossover wires.
RMC-111 series also support the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, then RMC-111 series will force the link to shutdown as soon as noticed that the other link has failed, giving the application software a sign to react to the situation. Therefore, the RMC-111 series to collocate RMC-1000 is reliable media converter and can satisfy most demand of operating environment.
Features
Supports 1 port 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X
Support Ethernet to fiber or Ethernet to SFP port
Support LFP (Link Fault Pass-through) function
Supports full/half duplex operation
Supports store and forward transmission
Provided DIP-Switch to setting function
Hot-swappable, High reliability and easy installation
Up to 18 slot high density installation in RMC-1000 chassis on 19 inches rack
Specifications
|
ORing Media Converter Model
|
RMC-111FB-MM
|
RMC-111FB-SS
|
| Physical Ports |
|---|
| Port type |
100Based-FX Multi-mode Port |
100Based-FX Single-mode Port |
| Fiber Ports Number |
1 |
1 |
| Fiber Diameter (µm) |
62.5/125 µm
50/125 µm |
9/125 µm |
| Fiber Optical Connector |
SC |
SC |
| Typical Distance (Km) |
2 Km |
30 Km |
| Wavelength (nm) |
1310 nm |
1310 nm |
| Max. Output Optical Power (dbm) |
-14 dbm |
-8 dbm |
| Min. Output Optical Power (dbm) |
-23.5 dbm |
-15 dbm |
| Max. Input Optical Power (Saturation) |
0 dbm |
0 dbm |
| Min. Input Optical Power (Sensitivity) |
-31 dbm |
-34 dbm |
| Link Budget (db) |
7.5 db |
19 db |
| WLAN interface | | |
|---|
| Ethernet Standards |
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-T(X) and 100Base-FX
IEEE 802.3x for Flow control |
| Processing |
Store-and-Forward |
| DIP-Switch setting |
DIP-Switch 1 for LFP mode selection : (ON) enable / (OFF) disable
DIP-Switch 2 for Ethernet speed selection : (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate
DIP-Switch 3 for Ethernet full/half duplex selection : (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate
DIP-Switch 4 for fiber full/half duplex selection : (ON) Half-Duplex / (OFF) Full-Duplex |
| LED Indicators |
|
|
| Power indicator |
Green : Power LED x 1 |
| 10/100Base-T(X) RJ45 port indicator |
Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) Link down
Amber for 100Mbps/10Mbps indicator – (ON) Working at 100Mbps / (OFF) Working at 10Mbps
Green for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex |
| 100Base-FX fiber port indicator |
Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down
Green for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex |
| LFP statue indicator |
Amber LED – (ON) LFP function fail / (OFF) LFP function disablem |
| Power | |
|
|---|
| Power consumption (Typ.) |
2.2 Watts |
| Overload current protection |
Present |
| Physical Characteristics | | |
|---|
| Dimension (W x D x H) |
21.8 (W) x 73.1 (D) x 126 (H) mm |
| Weight (g) |
145 g |
| Environmental | | |
|---|
| Storage Temperature |
-40 to 85°C (-40 to 185°F) |
| Operating Temperature |
-10 to 60°C (14 to 140°F) |
| Operating Humidity |
5% to 95% Non-condensing |
| Regulatory Approvals | | |
|---|
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock |
IEC60068-2-27 |
| Free Fall |
IEC60068-2-32 |
| Vibration |
IEC60068-2-6 |
| Warranty |
5 years |