IGMC-1011GF/IGMC-1011GP series are industrial gigabit media converters provide media conversion between 10/100/1000Base-T(X) and 1000Base-X. IGMC-1011GF/IGMC-1011GP series are rigid IP-30 housing design and supporting an operating temperature of -40 to 70˚C. Therefore, the IGMC-1011GF/ IGMC-1011GP series are reliable media converters and can satisfy most demand of operating environment.
Features
Supports 1 port 10/100/1000Base-T(X) auto-negotiation and auto-MDI/MDI-X
Supports 1 port 1000Base-X multi-mode/single-mode or SFP port
Supports Jumbo Frame up to 10240 Bytes
Supports store and forward transmission
Relay output to carry capacity of 1A at 24 VDC
Rigid IP-30 housing design
DIN-Rail and wall mounting enabled
Specifications
|
ORing Media Converter Model
|
IGMC-1011GF-MM |
IGMC-1011GF-SS |
IGMC-1011GP |
| Physical Ports |
|---|
| 10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX |
1 |
1 |
1 |
| 1000Base-X SFP port |
- |
- |
1 |
| Fiber Ports Number |
1 |
1 |
-
|
| Fiber Ports standard |
1000Base-SX |
1000Base-LX |
-
|
| Fiber Mode |
Multi-mode |
Single-mode |
-
|
| Fiber Diameter (μm) |
62.5/125 μm 50/125 μm |
9/125 μm |
-
|
| Fiber Optical Connector |
SC |
SC |
-
|
| Typical Distance (km) |
550 m |
10 km |
-
|
| Wavelength (nm) |
850 nm |
1310 nm |
-
|
| Max. Output OpticalPower (dBm) |
-4 dBm |
-3 dBm |
-
|
| Min. Output OpticalPower (dBm) |
-9.5 dBm |
-9.5 dBm |
-
|
| Max. Input Optical Power(Saturation) |
0 dBm |
-3 dBm |
-
|
| Min. Input Optical Power (Sensitivity) |
-18 dBm |
-20 dBm |
-
|
| Link Budget (dB) |
-8.5 dB |
10.5 dB |
-
|
| Technology |
|---|
| Ethernet Standards |
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3z for 1000Base-X
|
| Jumbo Frame |
10240 Bytes |
| MAC Table |
2048 MAC addresses |
| Processing |
Store-and-Forward |
| LED Indicators |
|---|
| Power Indicator |
Green : Power LED x 2 |
| Fault Indicator |
Amber : Indicate power failure |
| 10/100/1000Base-T(X) RJ45 Port Indicator |
Green for port Link/Act. Amber for 100Mbps indicator |
| 1000Base-X Port Indicator |
Green for port Link/Act |
| Fault Contact |
|---|
| Relay |
Relay output to carry capacity of 1A at 24VDC |
| Dip Switch |
Relay output function enable / disable by dip switch |
| Power |
|---|
| Redundant Input Power |
Dual DC inputs. 12~48VDC on 6-pin terminal block. |
| Power Consumption (Typ.) |
3.5 Watts |
|
|
| Overload Current Protection |
Present |
|
|
| Reverse Polarity Protection |
Present |
|
|
| Physical Characteristics |
|---|
| Enclosure |
IP-30 |
|
|
| Dimensions (W x D x H) |
26.1(W) x 94.9(D) x 144.3(H) mm ( 1.03x3.74x5.68 inch.) |
| Weight (g) |
400 g |
400 g |
380 g |
| Environmental |
|---|
| Storage Temperature |
-40 to 85°C (-40 to 185°F) |
|
|
| Operating Temperature |
-40 to 70°C (-40 to 158°F) |
|
|
| Operating Humidity |
5% to 95% Non-condensing |
|
|
| Regulatory Approvals |
|---|
| EMI |
FCC Part 15, CISPR (EN55022) class A, |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock |
IEC60068-2-27 |
|
|
| Free Fall |
IEC60068-2-32 |
|
|
| Vibration |
IEC60068-2-6 |
|
|
| Safety |
EN60950-1 |
|
|
| Warranty |
5 years |
Accessories
| Model No. | Description |
|---|
| DR-45 series |
45W DIN-Rail power supply series |
| DR-75 series |
75W DIN-Rail power supply series |
| DR-120 series |
120W DIN-Rail power supply series |