ORing’sTransporterTM series un-managed Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications. The TPS-1080-M12 is an un-managed PoE Ethernet switch with 8x10/100Base-T(X) P.S.E. which is specifically designed for the toughest and fully compliant with EN50155 requirement. TPS-1080-M12 also supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernetnetwork. Each TPS-1080-M12 switch has 8X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. TPS-1080-M12EN50155 Ethernet switch use M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. In addition, the wide operating temperature range from -40 oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for rolling stock and highly-managed PoE Ethernet application.
Features
Leading EN50155-compliant Ethernet switch for rolling stock application
Provide 8x10/100Base-T(X) PoE (P.S.E.) ports
Supports IEEE 802.3at compliant PoE with maximum 30Watts per port
Support dual power inputs for power redundancy
Support auto-negotiation and auto-MDI/MDI-X
Support store and forward transmission
Support flow control
M12 connectors to guarantee reliable operation against environmental disturbances
Rigid IP-40 housing design
Wall mounting enabled
Specifications
| ORing Switch Model |
TPS-1080-M12 |
TPS-1080-M12-24V |
| Physical Ports |
|---|
| 10/100 Base-T(X) Ports in M12 Auto MDI/MDIX with P.S.E. |
8 x M12 connector (4-pin D-coding) |
| Technology |
|---|
|
Ethernet Standards
|
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3x for Flow control
IEEE 802.3at compliant PoE specification (Maximum 30Watts per port)
|
|
MAC Table
|
8K MAC addresses
|
|
Processing
|
Store-and-Forward
|
| LED Indicators |
|---|
| Power Indicator |
Green : Power LED x 3 |
|
Fault Indicatorr
|
Amber : Indicate PWR1 or PWR2 failure |
|
10/100Base-T(X) M12 port indicator
and PoE indicator
|
Top for port Link/Act indicator. Green for 100Mbps link, Amber for 10 Mbps link
Middle Amber for Duplex / Collision indicator
Bottom blue for PoE Injected indicator |
| Fault contact |
|---|
| Relay |
Relay output to carry capacity of 3A at 24VDC on M12 connector (5-pin A-coding)
|
| Power |
|---|
| Redundant Input Power |
Dual 48VDC on 5-pin M23 connector
|
|
| Power Consumption (Typ.) |
2.5 Watts (power consumption of P.S.E. is not
included) |
7.5 Watts (power consumption of P.S.E. is not
included) |
| PoE Output Power |
240 Watts |
60 Watts (12~24VDC) / 120 Watts (24~57VDC) |
| Overload Current Protection |
Present |
| Reverse Polarity Protection |
Present |
| Physical Characteristic |
|---|
| Enclosure |
IP-40 |
| Dimension (W x D x H) |
125 (W) x 65 (D) x196 (H) mm
|
| Weight (g) |
996 g
|
1054 g |
| Environmental |
|---|
| Storage Temperature |
-40 to 85°C (-40 to 185°F) |
| Operating Temperature |
-40 to 70°C (-40 to 158°F) |
| Operating Humidity |
5% to 95% Non-condensing |
| Regulatory approvals |
|---|
| EMI |
FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4) |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS),
EN61000-4-8, EN61000-4-11
|
| Shock |
IEC60068-2-27 |
| Free Fall |
IEC60068-2-32 |
| Vibration |
IEC60068-2-6 |
| Warranty |
5 years |
Accessories
| Model No. | Description |
|---|
| M12C series |
Cables with M12 connectors |