ORing’s TransporterTM series un-managed Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications. The TGPS-1080-M12-24V is an un-managed PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. which is specifically designed for the toughest and fully compliant with EN50155 requirement. TGPS-1080-M12-24V also supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each TGPS-1080-M12-24V switch has 8X10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. TGPS-1080-M12-24V EN50155 Ethernet switch use M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. In addition, the wide operating temperature range from -40 oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for rolling stock and highly-managed PoE Ethernet application.
Features
Leading EN50155-compliant Ethernet switch for rolling stock application
Provide 8x10/100/1000Base-T(X) PoE (P.S.E.) ports
Supports IEEE 802.3at compliant PoE and total power budget is 120Watts with maximum 30Watts per port
Support dual power inputs for power redundancy
Support auto-negotiation and auto-MDI/MDI-X
Support store and forward transmission
Support flow control
M12 connectors to guarantee reliable operation against environmental disturbances
Rigid IP-40 housing design
Wall mounting enabled
Specifications
| ORing Switch Model |
TGPS-1080-M12-24V
|
| Physical Ports |
|---|
| 10/100/1000Base-T(X) Ports in M12With P.S.E. |
8 x M12 connector (8-pin A-coding) |
| Technology |
|---|
|
Ethernet Standards
|
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
IEEE 802.3at compliant PoE specification (total power budget is 120Watts with maximum 30Watts per port)
|
| MAC Table |
8K MAC addresses |
|
Processing
|
Store-and-Forward
|
| LED Indicators |
|---|
| Power Indicator |
Green : Power LED x 3 |
| Fault indicator |
Amber : Indicate PWR1 or PWR2 failure
|
| 10/100/1000Base-T(X) RJ45 port indicator and PoE indicator |
Top Green for port Link/Act indicator
Middle Amber for Duplex / Collision indicator
Bottom Blue for PoE Injected indicator
|
| Fault Contact |
|---|
| Relay |
Relay output to carry capacity of 3A at 24VDC on M12 connector (5-pin A-coding) |
| Power |
|---|
| Redundant Input power |
Dual DC inputs. 24VDC (12 ~ 57VDC) on 5-pin M23 connector
|
| Power Consumption (Typ.) |
11 Watts (power consumption of P.S.E. is not included) |
| PoE Output Power |
60 Watts (12~24VDC) / 120 Watts (24~57VDC) |
| Overload Current Protection |
Present |
| Reverse Polarity Protection |
NOT Present |
| Physical Characteristic |
|---|
| Enclosure |
IP-40 |
| Dimension (W x D x H) |
125 (W) x 65 (D) x 196 (H) mm
|
| Weight (g) |
988 g
|
| Environmental |
|---|
| Storage Temperature |
-40 to 85°C (-40 to 185°F) |
| Operating Temperature |
-40 to 70°C (-40 to 158°F) |
| Operating Humidity |
5% to 95% Non-condensing |
| Regulatory approvals |
|
|---|
| EMI |
FCC FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4) |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
|
| Shock |
IEC60068-2-27 |
| Free Fall |
IEC60068-2-32 |
| Vibration |
IEC60068-2-6 |
| Safety |
EN60950-1 |
| Warranty |
5 years |
Accessories
| Model No. | Description |
|---|
| M12C series |
Cables with M12 connectors |