IGS-1080A is the slim type unmanaged gigabit Ethernet switch with 8 x 10/100/1000Base-T(X) ports. IGS-1080A supports redundant power input, rigid IP-30 housing, plus DIP switches for enabling or disabling relay output alarm. In addition, the wide operating temperature range from -40°C to 70°C can satisfy most of operating environments.
Features
Supports auto-negotiation and auto-MDI/MDI-X
Supports Jumbo Frame up to 9K Bytes
Relay output for carrying capacity of 1A at 24 VDC
Supports store-and-forward transmission
Supports flow control
Hardware DIP switch for enabling/disabling the warning function
Rigid IP-30 housing design
DIN-Rail and wall mounting enabled
Specifications
| ORing Gigabit Switch Model |
IGS-1080A |
| Physical Ports | |
|---|
| 10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX |
8 |
| Technology | |
|---|
| Ethernet Standards |
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control |
| MAC Table |
2048 MAC addresses |
| Processing |
Store-and-Forward |
| LED Indicators | |
|---|
| Power Indicator |
Green : Power LED x 2 |
| Fault Indicator |
Amber : Indicates PWR1 or PWR2 failure occurred |
| 10/100/1000Base-T(X) RJ45 Port Indicator |
Green for port Link / Act Amber for 100Mbps indicator |
| DIP Switch | |
|---|
| DIP-Switch 1 |
Power-1 failed warning : (ON) enable, (OFF) disable |
| DIP-Switch 2 |
Power-2 failed warning : (ON) enable, (OFF) disable |
| Fault Contact | |
|---|
| Relay |
Relay output to carry capacity of 1A at 24VDC |
| Power | |
|---|
| Redundant Input Power |
Dual DC inputs. 12~48 VDC on 6-pin terminal block |
| Power Consumption (Typ.) |
7 Watts |
| Overload Current Protection |
Present |
| Reverse Polarity Protection |
Present |
| Physical Characteristics | |
|---|
| Enclosure |
IP-30 |
| Dimensions (W x D x H) |
26.1(W) x 94.9(D) x 144.3(H) mm ( 1.03x3.74x5.68 inch.) |
| Weight (g) |
375g |
| Environmental | |
|---|
| Storage Temperature |
-40 to 85°C (-40 to 185°F) |
| Operating Temperature |
-40 to 70°C (-40 to 158°F) |
| Operating Humidity |
5% to 95% Non-condensing |
| Regulatory Approvals | |
|---|
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock |
IEC60068-2-27 |
| Free Fall |
IEC60068-2-32 |
| Vibration |
IEC60068-2-6 |
| Safety |
EN60950-1 |
| Warranty |
5 years |
Accessories
| Model No. | Description |
|---|
| DR-75 series |
75W DIN-Rail power supply series |
| DR-120 series |
120W DIN-Rail power supply series |
| DR-45 series |
45W DIN-Rail power supply series |