IGPS-R9084GP

Industrial Layer-3 12-port managed Gigabit PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. and 4x100/1000Base-X, SFP socket

IGPS-R9084GP
zoom Zoom image
 

IGPS-R9084GP is Layer-3 managed redundant ring PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports and 4x100/1000Base-X SFP ports. The IGPS-R9084GP supports Layer-3 routing for better network performance on large-scale LANs into multiple subnets to support long-haul and EMI immunity communications. The hardware Layer-3 switch is optimized to transmit data as fast as Layer-2 switches. The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IGPS-R9084GP also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-R9084GP switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection and support wide operating temperature from -40°C to 75°C. IGPS-R9084GP can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.

Features

Supports Layer 3 routing, RIP and static routing function

Support O-Ring (recovery time < 30ms over 250 units of connection) and MSTP(RSTP/STP compatible) for Ethernet Redundancy

Open-Ring support the other vendor's ring technology in open architecture

O-Chain allow multiple redundant network rings

Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function

8 port P.S.E. fully compliant with IEEE802.3at standard, provide up to 30 Watts per port

Support PoE scheduled configuration and PoE auto-ping check function

Support IEEE 1588v2 clock synchronization

Support IPV6 new internet protocol version

Support Modbus TCP protocol

Support IEEE 802.3az Energy-Efficient Ethernet technology

Provided HTTPS/SSH protocol to enhance network security

Support SMTP client

Support IP-based bandwidth management

Support application-based QoS management

Support Device Binding security function

Support DOS/DDOS auto prevention

IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic

Support SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management

Support ACL, TACACS+ and 802.1x User Authentication for security

Supports 9.6K Bytes Jumbo Frame

Multiple notification for warning of unexpected event

Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision) configuration

Support LLDP Protocol

Rigid IP-30 housing design

DIN-Rail and wall mounting enabled

Specifications

ORing Switch Model

IGPS-R9084GP
Physical Ports 

10/100/1000Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX

 8

100/1000Base-X SFP port

 4
Technology 
Ethernet Standards  

IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for 1000Base-T
IEEE 802.z for 1000Base-X
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table 8k
Priority Queues 8
Processing Store-and-Forward
Switch Properties Switching latency: 7 us
Switching bandwidth: 24Gbps
Max. Number of Available VLANs: 256
IGMP multicast groups: 128 for each VLAN
Port rate limiting: User Define
Jumbo frame Up to 9.6K Bytes
Security Features Device Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
Single 802.1x and Multiple 802.1x
MAC-based authentication
QoS assignment
Guest VLAN
MAC address limit
TACACS+
VLAN (802.1Q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Web and CLI authentication and authorization
Authorization (15 levels)
IP source guard
Https / SSH enhance network security
Software Features

Hardware routing, RIP and static routing
IEEE 1588v2 clock synchronization

IEEE 802.1D Bridge, auto MAC address learning/aging and MAC address (static)
Multiple Registration Protocol (MRP)
RSTP/MSTP (IEEE 802.1w/s)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging
Voice VLAN
IGMP v2/v3 Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client/snooping
DHCP Relay
Modbus TCP
DNS client proxy
ARP inspection
SMTP Client
Network Redundancy O-Ring
Open-Ring
O-Chain
MRP
MSTP (RSTP/STP compatible)
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable. 115200bps, 8, N, 1
LED Indicators 

Power Indicator (PWR)

Green : Power LED x 3
Ring Master Indicator (R.M.) Green : Indicates that the system is operating in O-Ring Master mode
O-Ring Indicator (Ring) Green : Indicates that the system operating in O-Ring mode
Green Blinking : Indicates that the Ring is broken.
Fault Indicator (Fault)

Amber : Indicates PWR1 or PWR2 failure occurred

0/100/1000Base-T(X) RJ45 Port
Indicator

Dual color LED : Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator

100/1000Base-X SFP port indicator

Green for port Link/Act.
PoE Indicator Green : PoE enabled LED x 8
Fault contact 
Relay

Relay output to carry capacity of 1A at 24VDC
Power 
Redundant Input Power

Dual DC inputs. 50~57VDC on 6-pin terminal block.
Power consumption (Typ.)

19 Watts (PoE output not included)

Overload current protection

 Present

Reverse polarity protection

Not Present

Physical Characteristics

Enclosure IP-30
Dimensions (W x D x H)

96.4 x 145.5 x 154 mm (3.8 x 5.73 x 6.06 inch)
Weight (g)

1560 g
Environmental 
Storage Temperature

-40 to 85°C (-40 to 185°F)
Operating Temperature

-40 to 75°C (-40 to 167°F)
Operating Humidity

5% to 95% Non-condensing
Regulatory Approvals 
EMI

FCC Part 15, CISPR (EN55022) class A
EMS

EN61000-4-2 (ESD)
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock

IEC60068-2-27
Free Fall

IEC60068-2-31
Vibration

IEC60068-2-6
Safety

EN60950-1
Warranty 5 years

Available Model

Model No.Description
IGPS-R9084GP Industrial Layer-3 12-port managed Gigabit PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. and 4x100/1000Base-X, SFP socket

Accessories

Model No.Description
Open-Vision M500 Powerful Network Management Windows Utility Suite, 500 IP devices
SFP100 series 100Mbps SFP optical transceiver
SFP1G series 1Gbps SFP optical transceiver
 
 
 

Main Search Products catalog Mail Contacts