IGPS-1080-24V is the unmanaged Gigabit PoE Ethernet switch with P.S.E. function and relay output of 24VDC at 1A. IGPS-1080-24V supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1080-24V supports wide-range 24~36VDC power inputs and generates 50VDC P.S.E. power output per port. IGPS-1080-24V PoE switch has 8 x 10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40°C to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
Features
IGPS-1080-24V provides 8x10/100/1000Base-T(X) PoE (P.S.E.) ports
Supports IEEE 802.3at compliant PoE and total power budget is 120 Watts with maximum 30 Watts per port
Supports dual wide range 24~36VDC power inputs for power redundancy
Supports Jumbo frame up to 9KBytes
Supports auto-negotiation and auto-MDI/MDI-X
Supports store and forward transmission
Supports flow control
Rigid IP-30 housing design
DIN-Rail and wall mounting enabled
Specifications
| ORing Switch Model |
IGPS-1080-24V |
| Physical Ports |
|---|
| 10/100/1000Base-T(X) Ports in RJ45 With P.S.E. |
8 |
| Technology |
|---|
| Ethernet Standards |
IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.) |
| MAC Table |
2048 MAC addresses |
| Processing |
Store-and-Forward |
| LED Indicators |
|---|
| Power Indicator |
Green : Power LED x 2 |
| Fault Indicator |
Amber : Indicate PWR1 or PWR2 failure |
| 10/100/1000Base-T(X) RJ45 port and PoE indicator |
Green for port Link/Act.
Green for PoE power injected. |
| Fault contact |
|---|
| Relay |
Relay output to carry capacity of 1A at 24VDC |
| DIP-Switch |
|---|
|
DIP-Switch 1
|
Power-1 failed warning : (ON) enable, (OFF) disable |
|
DIP-Switch 2
|
Power-2 failed warning : (ON) enable, (OFF) disable |
| Power |
|---|
|
Redundant Input power
|
Dual DC inputs. 24~36VDC on 6-pin terminal block.
|
|
Power consumption (Typ.)
|
7.8 Watts
|
|
Overload current protection
|
Present
|
|
Reverse polarity protection
|
NOT Present
|
| Physical Characteristic |
|---|
|
Enclosure
|
IP-30 |
|
Dimension (W x D x H)
|
41(W) x 94.9(D) x 144.3(H) mm
|
|
Weight (g)
|
452 g
|
| Environmental |
|---|
| Storage Temperature |
-40 to 85°C (-40 to 185°F) |
| Operating Temperature |
-40 to 70°C (-40 to 158°F) |
| Operating Humidity |
5% to 95% Non-condensing |
| Regulatory approvals |
|---|
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock |
IEC60068-2-27 |
| Free Fall |
IEC60068-2-32 |
| Vibration |
IEC60068-2-6 |
| Safety |
EN60950-1 |
| Warranty |
5 years |