IGPS-1042GPA is an slim type unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1042GPA supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1042GPA has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports, and 2x100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIP-Switch below. IGPS-1042GPA supports wide range 50~57VDC power inputs and generates 50VDC P.S.E. power output per port. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
Features
Provide 4x10/100/1000Base-T(X) PoE (P.S.E.) ports
Support P.S.E. based on IEEE 802.3at standard up to 30 Watts per port
Supports Jumbo frame up to 9KBytes
SFP port support 100Base-FX and 1000Base-X speed
Support auto-negotiation and auto-MDI/MDI-X
Support store and forward transmission
Supports flow control
Rigid IP-30 housing design
DIN-Rail and wall mounting enabled
Specifications
| ORing Switch Model |
IGPS-1042GPA
|
| Physical Ports |
|---|
|
10/100/1000Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX
|
4 |
|
100/1000Base-X SFP port
|
2 |
| Technology |
|---|
| Ethernet Standards |
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3z for 1000Base-X
IEEE 802.3x for Flow control
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
|
| MAC Table |
1K MAC addressessses |
| Processing |
Store-and-Forward |
| LED Indicators |
|---|
|
Power indicator
|
Green : Power LED x 2
|
| Fault Indicator |
Amber : Indicates PWR1 or PWR2 failure occurred
|
|
10/100/1000Base-T(X) RJ45 port indicator and PoE indicator (P1 ~ P4)
|
Green for port Link/Act.
Green for PoE power injected
|
|
100/1000Base-X SFP port indicator (P5 ~ P6)
|
Green for port Link/Act.
|
|
SFP Speed DIP-Switch
|
|---|
|
DIP-Switch 1/2
|
DIP-Switch 1 (ON) and DIP-Switch 2 (ON) : SFP speed setting to 100Mbps
DIP-Switch 1 (OFF) and DIP-Switch 2 (OFF) : SFP speed setting to 1000Mbps
|
|
Relay Output DIP-Switch
|
|---|
|
DIP-Switch 1
|
Power-1 failed warning : (ON) enable, (OFF) disable
|
|
DIP-Switch 2
|
Power-2 failed warning : (ON) enable, (OFF) disable
|
| Fault contact |
|---|
| Relay |
Relay output to carry capacity of 1A at 24VDC
|
| Power |
|---|
| Redundant Input Power |
Dual DC inputs. 50~57VDC on 6-pin terminal block.
|
| Power consumption (Typ.) |
6.3 Watts
|
|
Overload current protection
|
Present |
|
Reverse polarity protection
|
Not Present
|
|
Physical Characteristics
|
|---|
| Enclosure |
IP-30 |
| Dimensions (W x D x H) |
26.1 (W) x 94.9 (D) x 144.3(H) mm
|
| Weight (g) |
410 g
|
| Environmental |
|---|
| Storage Temperature |
-40 to 85°C (-40 to 185°F)
|
| Operating Temperature |
-40 to 70°C (-40 to 158°F)
|
| Operating Humidity |
5% to 95% Non-condensing
|
| Regulatory Approvals |
|---|
| EMI |
FCC Part 15, CISPR (EN55022) class A
|
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8,EN61000-4-11
|
| Shock |
IEC60068-2-27
|
| Free Fall |
IEC60068-2-32
|
| Vibration |
IEC60068-2-6
|
| Safety |
EN60950-1
|
| Warranty |
5 years |
Accessories
| Model No. | Description |
|---|
| SFP100 series |
100Mbps SFP optical transceiver |
| SFP1G series |
1Gbps SFP optical transceiver |