IES-1041FX/1042FX series are unmanaged Ethernet switches with 4 x 10/100Base-T(X) and 100Base-FX ports. IES-1041FX/1042FX series support redundant power inputs, configurable relay output alarm and rigid IP-30 housing. In addition, the wide operating temperature range from -40 to 70°C can satisfy most of operating environment
Features
IES-1041FX series provide 4x10/100Base-T(X) and 1x100Base-FX single/multi-mode fiber ports
IES-1042FX series provide 4x10/100Base-T(X) and 2x100Base-FX single/multi-mode fiber ports
Support auto-negotiation and auto-MDI/MDI-X
Support store-and-forward transmission
Support flow control
Warning system by relay output
Rigid IP-30 housing design
DIN-Rail and wall mounting enabled
Specifications
| ORing Switch Model |
IES- 1041FX-MM-SC |
IES- 1041FX-SS-SC |
| Physical Ports | | |
|---|
| 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX |
4 |
4 |
| Fiber Ports Number |
1 |
1 |
| Fiber Ports Standard |
100Base-FX |
100Base-FX |
| Fiber Mode |
Multi-mode |
Single-mode |
| Fiber Diameter (μm) |
62.5/125 μm
50/125 μm |
9/125 μm |
| Fiber Optical Connector |
SC |
SC |
| Fiber Ports Specifications Typical Distance (km) |
2 km |
30 km |
| Wavelength (nm) |
1310 nm |
1310 nm |
| Max. Output Optical Power (dBm) |
-14 dBm |
-8 dBm |
| Min. Output Optical Power (dBm) |
-23.5 dBm |
-15 dBm |
| Max. Input Optical Power(Saturation) |
0 dBm |
0 dBm |
| Min. Input Optical Power (Sensitivity) |
-31 dBm |
-34 dBm |
| Link Budget (dB) |
7.5 dB |
19 dB |
| Technology | | |
|---|
| Ethernet Standards |
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3x for Flow control |
| MAC Table |
2048 MAC addresses |
| Processing |
Store-and-Forward |
| LED Indicators | | |
|---|
| Power Indicator |
Green : Power LED x 2 |
| Fault Indicator |
Amber : Indicates unexpected events occurred |
| 10/100Base-T(X) RJ45 Port Indicator |
Green for port Link/Act. Amber for Duplex/Collision |
| Fiber Port LED |
Green for port Link/Act. |
| Fault contact | | |
|---|
| Relay |
Relay output to carry capacity of 1A at 24VDC |
| Power | | |
|---|
| Redundant Input Power |
Dual DC inputs: 12~48VDC on 6-pin terminal block |
| Power Consumption (Typ.) |
5 watts |
5 watts |
| Overload Current Protection |
Present |
| Reverse Polarity Protection |
Present on terminal block |
| Physical Characteristics | | |
|---|
| Enclosure |
IP-30 |
| Dimensions (W x D x H) |
26.1(W) x 94.9(D) x 144.3(H) mm (1.03 x 3.74 x 5.68 inch.) |
| Weight (g) |
378 g |
378 g |
| Environmental | | |
|---|
| Storage Temperature |
-40 to 85°C (-40 to 185°F) |
| Operating Temperature |
-40 to 70°C (-40 to 158°F) |
| Operating Humidity |
5% to 95% Non-condensing |
|
| Regulatory Approvals | | |
|---|
| EMI |
FCC Part 15, CISPR (EN55022) class A, |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock |
IEC60068-2-27 |
| Free Fall |
IEC60068-2-32 |
| Vibration |
IEC60068-2-6 |
| Safety |
EN60950-1 |
| MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ) |
609,782 |
611,433 |
| Warranty |
5 years |
Accessories
| Model No. | Description |
|---|
| DR-120 series |
120W DIN-Rail power supply series |
| DR-45 series |
45W DIN-Rail power supply series |