IDS-322 Series

Industrial 2 secure serial port to Ethernet device server with 2xRS-232/422/485 and 2x10/100Base-T(X)

 

IDS-322 is an innovative secure 2 port RS-232/422/485 to 2 ports LAN secure device server with standard features of device server, such like TCP/IP interface and versatile operation modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, and UDP. In addition, the Windows untility, DS-Tool, could configure multiple devices and set up the mappings of Virtual Com. On the other hand, IDS-322 can simultaneously transfer data up to 5 redundant host PCs to aovid Ethernet connection breakdown or any host PC fails. Further, IDS-322 features HTTPS, SSH, and SSL encryption to assure the security of critical data transmission. IDS-322 supports RS-232/422/485 and provides dual redundant power inputs, 12~48 VDC, on terminal block to guarantee a non-stop operation. Further, IDS-322+ features PoE PD (Power Device) function, compliant with IEEE802.3af standard, with 1kv isolation on the PoE port. With wide operating temperature, -40~70°C, and rugged IP-30 housing design, IDS-322 series could operate in the harsh industrial environment. Therefore, IDS-322 is the best solution to the high demand of secure serial to Ethernet critical data communication.

Features

Operating Modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP, Modbus Gateway

Support 1xRS-232/422/485 in DB9 connector

Support Modbus Gateway : Modbus TCP, Modbus RTU, Modbus ASCII

Redundant multiple host devices:

  • 5 host devices: Virtual COM, TCP Server, TCP Client mode;
  • 4 IP ranges: UDP

Security: SSL data encryption; secured management by HTTPS and SSH; IP Access: IP White List

1KV isolation for PoE PD port (IDS-322+)

Ethernet switch mode enable Daisy Chain

Event Warning by Syslog, SNMP trap, and Beeper

Configurable by Web-based and Windows utility (DS-Tool)

Various Windows O.S. supported:

  • Windows NT
  • 2000
  • XP
  • 2003
  • VISTA(32/64bit)
  • Windows 7(32/64bit)

Specifications

ORing Switch Model IDS-322 IDS-322+
Physical Ports 
10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX 2 2
PoE P.D. port none Present at ETH2 Fully compliant with IEEE 802.3af Power Device specification Over load & short circuit protection Isolation Voltage: 1000 VDC min. Isolation Resistance : 108 ohms min
Serial Ports 
Connector DB9 x 1
Operation Mode RS-232/422/485
Serial Baud Rate 110 bps to 460.8 Kbps
Data Bits 7, 8
Parity odd, even, none, mark, space
Stop Bits 1, 1.5, 2
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
Flow Control XON/XOFF, RTS/CTS, DTR/DSR
Network Protocol 
Protocol ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS
LED Indicators 
Power Indicator 3 x LEDs, PWR 1(2)(PoE) Ready: Green On: Power is on 2 x LEDs, PWR 1(2) Ready: Green On: Power is on
10/100/1000Base-T(X) RJ45 port indicator ( IDS-312, IDS-312+) Green for port Link/Act at 100Mbps.
LED Display System (Front panel) Serial TX / RX LEDs: Red: Serial port is receiving data Green: Serial port is transmitting data
Power 
Redundant Input power Dual DC inputs. 12-48VDC on 6-pin terminal block Dual DC inputs. 12-48VDC on 6-pin terminal block (IEEE 802.3af PoE PD (Eth 1))
Power Consumption (Typ.)< 3.84W 3.84W
Overload current protection Present
Reverse polarity protection Present on terminal block
Physical Characteristic 
Enclosure IP-30
Dimension (W x D x H) 45 (W) x 81 (D) x 95 (H) mm
Weight (g) 316g 335g
Environmental 
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory approvals 
EMI FCC Part 15, CISPR (EN55022) class A
EMS IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1 (compliant, certification pending)
Warranty 5 years

Available Model

Model No.Description
IDS-322+ Industrial 2 secure serial port to Ethernet device server with 2xRS-232/422/485 and 2x10/100Base-T(X)
IDS-322++ Industrial 2 secure serial port to Ethernet device server with 2xRS-232/422/485 and 2x10/100Base-T(X)
DIN-Rail источник питанияОписание
DR-120-12 120 Вт на DIN-Rail 12 В постоянного тока / 10А с питанием от 100 до 120 В переменного тока / от 220 до 240 В переменного тока, -10 ~ 60 ° C
DR-120-24 120 Вт на DIN-Rail 24 В постоянного тока / 5А с питанием от 100 до 120 В переменного тока / от 220 до 240 В переменного тока, -10 ~ 60 ° C
DR-120-48 120 Вт на DIN-Rail 48 В постоянного тока / 2.5А с питанием от 100 до 120 В переменного тока / от 220 до 240 В переменного тока, -10 ~ 60 ° C
DR-4512 45 Вт на DIN-Rail 12 В постоянного тока / 3.5А с блоком питания с универсальным входом от 100 до 240 В переменного тока, -10 ~ 50 ° C
DR-4524 45 Вт на DIN-Rail 24 В постоянного тока / 2А с блоком питания с универсальным входом от 100 до 240 В переменного тока, -10 ~ 50 ° C
DR-75-12 75 Вт на DIN-Rail 24 В постоянного тока / 6.3А с блоком питания с универсальным входом от 100 до 240 В переменного тока, -10 ~ 60 ° C
DR-75-24 75 Вт на DIN-Rail 24 В постоянного тока / 3.2А с блоком питания с универсальным входом от 100 до 240 В переменного тока, -10 ~ 60 ° C
DR-75-48 75 Вт на DIN-Rail 24 В постоянного тока / 1.6А с блоком питания с универсальным входом от 100 до 240 В переменного тока, -10 ~ 60 ° C