IDS-242GT-I+

Industrial 4-port secure serial to Ethernet device server with 4xRS-422/485(2KV isolation) and 2x10/100/1000Base-T(X), 1-port PoE P.D.

IDS-242GT-I+
zoom Zoom image
 

IDS-242GT-I+ is an innovative secure 4 port RS-422/485 to 2 ports Gigabit Ethernet secure device server with standard features of device server, such like TCP/IP interface and versatile operation modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, and UDP. In addition, the Windows untility, DS-Tool, could configure multiple devices and set up the mappings of Virtual Com. Further, IDS-242GT-I+ features HTTPS, SSH, and SSL encryption to assure the security of critical data transmission. IDS-242GT-I+ supports RS-422/485 and provides dual redundant power inputs, 12~48 VDC, on terminal block to guarantee a non-stop operation. In addition, IDS-242GT-I+ also provides P.D. feature at ETH2 port which is fully compliant with IEEE802.3af PoE P.D. specification to save the layout cost of power line. With wide operating temperature, -40~70oC, and rugged IP-30 housing design, IDS-242GT-I+ series could operate in the harsh industrial environment. Therefore, IDS-242GT-I+ is the best solution to the high demand of secure serial to Ethernet critical data communication.

Features

Operating Modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP, Modbus Gateway

Support 2 Gigabit Ethernet ports for high speed data transmission

Support Modbus Gateway : Modbus TCP, Modbus RTU, Modbus ASCII

Redundant multiple host devices:

  • 5 host devices: Virtual COM, TCP Server, TCP Client mode;
  • 4 IP ranges: UDP

Security: SSL data encryption; secured management by HTTPS and SSH

1KV isolation for PoE P.D. port

2KV isolation for serial port

Event Warning by Syslog, SNMP trap, and Beeper

Configurable by Web-based and Windows utility (DS-Tool)

Supports 9K Bytes Jumbo Frame

Various Windows O.S. supported:

  • Windows NT
  • 2000
  • XP
  • 2003
  • VISTA(32/64bit)
  • Windows 7(32/64bit)

Specifications

tr>

ORing Switch Model IDS-242GT-I+
Physical Ports 
10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX 2
PoE P.D. port Present at ETH2 Fully compliant with IEEE 802.3af Power Device specification Over load & short circuit protection Isolation Voltage: 1000 VDC min. Isolation Resistance : 108 ohms min
Serial Ports 
Connector 5 pin terminal block x 4
Operation Mode RS-422/485
Serial Baud Rate 110 bps to 921.6 Kbps
Data Bits 7, 8
Parity odd, even, none, mark, space
Stop Bits 1, 1.5, 2
RS-422 TxD+, TxD-, RxD+, RxD-,GND
RS-485 (4-wire) TxD+, TxD-, RxD+, RxD-,GND
RS-485 (2-wire) DATA+, DATA-, GND
2KV TxD+, TxD-, RxD+, RxD-,GND
Flow Control XON/XOFF, RTS/CTS, DTR/DSR
Network Protocol 
Protocol ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS
Jumbo frame Up to 9.6K Bytes
LED Indicators 
Power Indicator PWR 1(2) / Ready: Green On: Power is on and functioning Normally
10/100/1000Base-T(X) RJ45 port indicator Top Green for port Link at 1000Mbps Amber for port Link at 100Mbps off for port Link at 10Mbps Bottom Green for port Link/Act
LED Display System (Front panel) Serial TX / RX LEDs: Green for Serial port transmitting data Amber for Serial port receiving data G1~G6 : Green for port Link/Act Fault : indicate unexpected event occurred
Power 

Redundant Input power

 Dual DC inputs. 12-48VDC on 6-pin terminal block

Power Consumption (Typ.)

 6.96 W
Overload current protection Present
Reverse polarity protection Present on terminal block
Physical Characteristic 
Enclosure IP-30
Dimension (W x D x H) 54.2(W)x106.1(D)x145.4(H) mm 2.13x4.18x5.72 inch.
Weight (g) 705g
Environmental 
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory approvals 
EMI FCC Part 15, CISPR (EN55022) class A
EMS IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1 (compliant, certification pending)
Warranty 5 years

Available Model

Model No.Description
IDS-242GT-I+ Industrial 4-port secure serial to Ethernet device server with 4xRS-422/485(2KV isolation) and 2x10/100/1000Base-T(X), 1-port PoE P.D.
DIN-Rail источник питанияОписание
DR-120-12 120 Вт на DIN-Rail 12 В постоянного тока / 10А с питанием от 100 до 120 В переменного тока / от 220 до 240 В переменного тока, -10 ~ 60 ° C
DR-120-24 120 Вт на DIN-Rail 24 В постоянного тока / 5А с питанием от 100 до 120 В переменного тока / от 220 до 240 В переменного тока, -10 ~ 60 ° C
DR-120-48 120 Вт на DIN-Rail 48 В постоянного тока / 2.5А с питанием от 100 до 120 В переменного тока / от 220 до 240 В переменного тока, -10 ~ 60 ° C
DR-4512 45 Вт на DIN-Rail 12 В постоянного тока / 3.5А с блоком питания с универсальным входом от 100 до 240 В переменного тока, -10 ~ 50 ° C
DR-4524 45 Вт на DIN-Rail 24 В постоянного тока / 2А с блоком питания с универсальным входом от 100 до 240 В переменного тока, -10 ~ 50 ° C
DR-75-12 75 Вт на DIN-Rail 24 В постоянного тока / 6.3А с блоком питания с универсальным входом от 100 до 240 В переменного тока, -10 ~ 60 ° C
DR-75-24 75 Вт на DIN-Rail 24 В постоянного тока / 3.2А с блоком питания с универсальным входом от 100 до 240 В переменного тока, -10 ~ 60 ° C
DR-75-48 75 Вт на DIN-Rail 24 В постоянного тока / 1.6А с блоком питания с универсальным входом от 100 до 240 В переменного тока, -10 ~ 60 ° C

 

 

 
 
 

Main Search Products catalog Mail Contacts